Vacuum Insulated Glazing VIG
Vacuum glazing is similar to double glazing, but the cavity between the panes is a vacuum. The main advantage of vacuum glazing is that it not only performs well but has only a small cavity, which means the glazed units are thin and light in comparison to standard double glazed units.
This type of unit is often the favoured option for historic buildings because vacuum units can be installed as individual panes between the transom and mullions of traditional timber frame windows. The thickness of a vacuum sealed units can be a low as 6mm, which is less than half the thickness of traditional double glazed units (around 20mm) which means in some cases they can even be installed within existing or refurbished timber frames. The performance of such windows can be from around 1.0 W/M2. K down to 0.5 W/M2.K, which is lower than the 1.2 to 3.7 W/(m²K) of standard double glazed units.
The cost of a vacuum glazed units is likely to be higher than standard double glazed units because of the precision nature of their design and manufacture. The natural effect of having a vacuum between the glazing panes is that the panes want to pull together, they are prevented from doing so through the insertion of tiny micro-spacers, less than a 1mm in diameter laid in a regular grid between the panes. These micro spacers are transparent and can often barely be seen.
The concept for vacuum glazing itself was developed as a proof of concept in the 1990's at the University of Sydney with initial commercialisation by Nippon Sheet Glass, Japan, in 1996. Pilkington glass consider their own SpaciaTM glazed unit to have been the world's first commercially available vacuum glazing, with sales starting a year later in 1997.
Pilkington Spacia™ is one example of a vacuum sealed product and available from Pilkington. It offers the thermal performance of conventional double glazing in the same thickness as a single glass pane. It balances historic preservation with modern comfort and environmental requirements, with a float glass pane on the inside and a low-emissivity glass pane on the outside, hermetically sealed. A diagram of the how a pane is made-up is given here, courtesy of the Pilkington, for further information visit the website directly by clicking the image.
[edit] Related articles on Designing Buildings
- Conservation rooflights.
- Domestic windows.
- Double glazing.
- Double glazing v triple glazing.
- Glass.
- Glazier.
- Glazing.
- Low-E glass.
- Patent glazing.
- Secondary glazing.
- Security glazing.
- Stained glass.
- Structural glass assembly.
- Suction lifter.
- Tempered glass.
- Triple glazing.
- Types of window.
- Window.
- Window frame.
Featured articles and news
What happened to Hadrian's Wall?
Its former stones can be found in buildings near its route.
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.
Election fails to spark construction industry revival
Contract awards and planning; post election.
Making diversity and inclusion easy for SMEs
The CIOB tool for companies with limited resources.
Sustainable Futures: Redefining Retrofit for Net Zero Living
BSRIA Briefing 2024, initial speakers announced.
Looking back at the UK's first Passivhaus leisure centre
Reflections on St Sidwell’s Point with CIAT.
A-Level results and electrical apprenticeships
Electrical Skills Index highlights areas with skills shortages.
One of the world's more unusual drive-throughs.
A quick introduction.
Hadrian's Wall Path and the national trails
The trails are heritage assets in their own right.
Articles on timely advice and hydraulic lime.
Building Designers Association of Australia
CIAT and BDAA sign Memorandum of Understanding.
Built Environment Inclusive partners issue statement committed to inclusion.
Building regulation requirements can have unintended consequences.
CIOB announces 2024/25 vice president
Sustainability champion Professor Saul Humphrey.